Table of Contents
Advertisement
MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Configure DRAM Timing
x CAS Latency Setting
x DRAM RAS Active Time
x DRAM RAS Precharge Time
x DRAM RAS to CAS Delay
CPU Clock Ratio
Linear Frequency Control
x CPU Clock (MHz)
x DRAM Clock (MHz)
AGP/PCI Clock Control
x AGP Clock (MHz)
x PCI Clock (MHz)
DRAM Voltage Control
: Move
Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
Configure DRAM Timing
Auto
Manual
CAS Latency Setting
Set CAS Latency manually. Options are: 2T, 2.5T, 3T, and Auto. (Default value: 2.5T)
DRAM RAS Active Time
Set DRAM RAS Active Time manually. Options are: 6T, 7T, 5T, 4T, 8T and 9T.
(Default value: 9T)
DRAM RAS Precharge Time
Set DRAM RAS Precharge Time manually. Options are: 3T, 2T, 4T, and 5T. (Default value:5T)
DRAM RAS to CAS Delay
Set DRAM RAS to CAS Delay Time manually. Options are: 3T, 2T, 4T, and 5T.
(Default value:5T)
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Linear Frequency Control
Disabled
Enabled
CPU Clock (MHz)
100MHz ~ 355MHz
If you use a 400MHz FSB Pentium 4 processor, please set "CPU Clock" to 100MHz. If you use a
533 MHz FSBPentium 4 processor, please set "CPU Clock" to 133MHz. If you use a 800MHz FSB
Pentium 4 processor, please set "CPU Clock" to 200MHz.
MB Intelligent Tweaker(M.I.T.)
[Auto]
2.5T
9T
5T
5T
[21X]
[Disabled]
133
AUTO
[AUTO]
66
33
[Normal]
+/-/PU/PD: Value
F6: Fail-Save Defaults
Configure the DRAM Timing automatically. (Default value)
Configure the DRAM Timing manually.
Disable this function. (Default value)
Enable this function.
Set CPU Host Clock from 100MHz to 355MHz.
- 31 -
Menu Level
[AUTO]
Configure DRAM
Timing automatically
[Manual]
Configure DRAM
Timing by manual
Warning: Wrong DRAM
Timing may make
system can't boot.
Clear CMOS to overcome
wrong Timing issue.
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup
Advertisement
Table of Contents
