Table of Contents
Advertisement
15) IR
Be careful with the polarity of the IR connector while you connect the IR. Please contact your
nearest dealer for optional IR device.
16) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
17) BAT (BATTERY)
8S648FXP-RZ Series Motherboard
Pin No.
1
1
2
3
4
5
1
Open: Normal
1
Short: Clear CMOS
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery, wait for 30 second.
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
- 18 -
Definition
VCC
No Pin
IR RX
GND
IR TX
CAUTION
Advertisement
Table of Contents
