Integrated Peripherals - Gigabyte 8S648FXP-RZ User Manual

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
IDE1 Conductor Cable
IDE2 Conductor Cable
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
AC97 Audio
Onboard LAN device *
USB Controller
USB Legacy Support
SiS Serial ATA Controller
SiS Serial ATA Mode
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
IDE1 Conductor Cable
Auto
ATA66/100/133
ATA33
IDE2 Conductor Cable
Auto Will be automatically detected by BIOS. (Default value)
ATA66/100/133
ATA33
On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip Secondary PCI IDE
Enabled
Disabled
AC97 Audio
Enabled
Disabled
Onboard LAN device *
Disabled
Enabled
"*" Only for 8S648FXP-RZ.
Integrated Peripherals
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[RAID]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[ECP]
[3]
+/-/PU/PD: Value
F6: Fail-Save Defaults
Will be automatically detected by BIOS. (Default value)
Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure your IDE
device and cable is compatible with ATA66/100/133).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device
and cable is compatible with ATA33).
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default value)
Disable onboard 2nd channel IDE port.
Enable onboard AC'97 audio function. (Default value)
Disable this function.
Disable this function.
Enable Onboard Lan Chip device. (Default value)
- 25 -
Menu Level
[Auto]
Auto-detect IDE
cable type
[ATA66/100/133]
Set Conductor cable
to ATA66/100/133(80
Pins)
[ATA33]
Set Conductor cable
to ATA33(40-Pins)
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup