Table of Contents
Advertisement
Quick Links
8S661FXMP-RZ
Intel
Pentium
4 Processor Motherboard
®
®
User's Manual
Rev. 1002
12ME-661FXMPRZ-1002
Copyright
© 2005 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a
commitment to update the information contained herein.
Advertisement
Table of Contents
Related Manuals for Gigabyte GA-8S661FXMP-RZ
Summary of Contents for Gigabyte GA-8S661FXMP-RZ
- Page 1 User's Manual Rev. 1002 12ME-661FXMPRZ-1002 Copyright © 2005 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners.
-
Page 3: Preparing Your Computer
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. -
Page 4: Table Of Contents
Table of Content Chapter 1 Introduction ....................5 Features Summary ........................5 8S661FXMP-RZ Motherboard Layout ..................7 Block Diagram ..........................8 Hardware Installation Process ..................... 9 Step 1: Install the Central Processing Unit (CPU) ............... 9 Step 1-1: CPU Installation ....................10 Step 1-2: CPU Cooling Fan Installation ................ -
Page 5: Chapter 1 Introduction
Chapter 1 Introduction Features Summary Socket 478 for Intel Pentium 4 (Northwood, Prescott) processor with ® ® HT Technology Supports 800/533/400MHz FSB L2 cache varies with processors Chipset North Bridge:SiS 661FX Chipset ® South Bridge:SiS ® Memory 2 184-pin DDR slots Supports DDR400/DDR333/DDR266 DIMMs Supports up to 2GB (Max.) Slots... - Page 6 I/O Control IT8705AF Onboard SATA RAID Onboard SiS964 chipset supports data striping (RAID 0) or mirroring (RAID 1) function supports JBOD function supports data transfer rate of up to 150 MB/s supports hot plugging function supports a maximum of 2 SATA connections Hardware Monitor CPU / System fan speed detection System voltage detection...
-
Page 7: 8S661Fxmp-Rz Motherboard Layout
8S661FXMP-RZ Motherboard Layout KB_MS CPU_FAN ATX FDD Socket 478 ATX_12V SiS 661FX F_AUDIO AUDIO IDE2 IDE1 ICS1883 IT8705AF SYS _FAN PCI1 SiS 964 SATA1 BIOS PCI2 CODEC SATA0 CLR_CMOS CD_IN PCI3 SUR_CEN SPDIF_IO PWR_LED F_PANEL F_USB1 F_USB2 - 7 - Introduction... -
Page 8: Block Diagram
Block Diagram Socket 478 CPUCLK+/- (100/133/200MHz) Processor AGP 4X/8X AGPCLK Host VGA Port 266/333/400MHz (66MHz) Interface DDR RAM SiS 661FX HCLK+/- (100/133/200MHz) 133MHz 3 PCI 33 MHz 14.318 MHz 48 MHz 2 Serial ATA BIOS SiS 964 Floppy LPC BUS IT8705AF ICS1883 LPT Port... -
Page 9: Hardware Installation Process
Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Install I/O Peripherals cables Step 2 Step 1 Step 4 Step 4... -
Page 10: Step 1-1: Cpu Installation
Step 1-1: CPU Installation Figure 1. Socket Pull the rod to the 90-degree directly. Actuation Lever Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then move the socket lever to the locked position while holding pressure on the center of the CPU. -
Page 11: Step 2: Install Memory Modules
Step 2: Install memory modules Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recom- mended that memory of similar capacity, specifications and brand be used. 2. -
Page 12: Step 3: Install Expansion Cards
Step 3: Install expansion cards 1. Read the related expansion card's instruction document before installing the expansion card into the computer. 2. Please make sure your AGP card is AGP 4X/8X (1.5V). 3. Please carefully pull out the small white drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. -
Page 13: Step 4-2: Connectors Introduction
LAN Port The LAN port provides Internet connection. Line In Devices like CD-ROM, walkman etc. can be connected to Line In jack. Line Out (Front Speaker Out) Connect the stereo speakers, earphone or front surround channels to this connector. MIC In Microphone can be connected to MIC In jack. - Page 14 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly.
- Page 15 4) SYS_FAN (System FAN Connector) This connector allows you to link with the cooling fan on the system case to lower the system temperature. Pin No. Definition +12V Sense 5) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and 2.88Mbytes floppy disk types.
- Page 16 S_ATA (Control by SiS964) For more detailed Serial ATA RAID setup information, please visit our website at http:\\www.gigabyte.com.tw. 8) F_PANEL (2x10 pins connector) Please connect the power LED, PC peaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment above.
- Page 17 9) BAT (Battery) CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn off the computer and unplug the power cord. 2.
- Page 18 11) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition CD-L CD-R 12) SPDIF_IO (SPDIF In/Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function.
- Page 19 14) F_ USB1 / F_USB2 (Front USB Connectors) Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while you connect the F_USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional F_USB cable, please contact your local dealer.
- Page 20 17) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short pins 1-2. Default doesn't include a jumper on pins 1-2 to prevent improper use of this header. Open: Normal Short: Clear CMOS 18) PWR_LED PWR_LED is connected with the system power indicator to indicate whether the system is on/off.
-
Page 21: Chapter 2 Bios Setup
Chapter 2 BIOS Setup Chapter 2 provides an overview of the BIOS Setup Program, which allows users to modify the basic system configurations. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING BIOS Setup Turning on the computer and pressing <Del>... - Page 22 If you can't find the settings you want, press Ctrl and F1 in BIOS main menu to access the hidden advanced options. • Standard CMOS Features This setup page includes all the items in standard compatible BIOS. • Advanced BIOS Features This setup page includes all the items of Award special enhanced features.
-
Page 23: Standard Cmos Features
Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Fri, Jan 9 2004 Item Help Time (hh:mm:ss) 22:31:24 Menu Level Change the day, month, IDE Channel 0 Master [None] year IDE Channel 0 Slave [None] IDE Channel 1 Master [None]... - Page 24 Drive A / Drive B The category identifies the types of floppy disk (drive A and drive B) installed in the computer. None No floppy disk is installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25" 5.25 inch AT-type high-density drive;...
-
Page 25: Advanced Bios Features
Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features Item Help Hard Disk Boot Priority [Press Enter] ardk sik Menu Level First Boot Device [Floppy] Second Boot Device [Hard Disk] Select Hard Disk Boot Device Priority Third Boot Device [CDROM] Boot Up Floppy Seek... - Page 26 Password Check Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt.
-
Page 27: Integrated Peripherals
Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals IDE1 Conductor Cable [Auto] Item Help IDE2 Conductor Cable [Auto] Menu Level On-Chip Primary PCI IDE [Enabled] [Auto] On-Chip Secondary PCI IDE [Enabled] Auto-detect IDE cable type AC97 Audio [Enabled] Onboard LAN device [Enabled]... - Page 28 Onboard LAN device Enabled Enable Onboard LAN function. (Default value) Disabled Disable this function. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB Legacy Support Enabled Enable USB Legacy Support. Disabled Disable USB Legacy Support. (Default value) SiS Serial ATA Controller Enabled Enable SiS Serial ATA Controller.(Default value)
-
Page 29: Power Management Setup
Parallel Port Mode This option is available when Onboard Parallel port is not set to Disabled. Use Parallel port as Standard Parallel Port. Use Parallel port as Enhanced Parallel Port. Use Parallel port as Extended Capabilities Port. (Default Value) ECP+EPP Use Parallel port as ECP &... - Page 30 System After AC Back When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system will be in "On" state. Laststate When AC-power back to the system, the system will return to the Last state before AC-power off.
-
Page 31: Pnp/Pci Configurations
PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment [Auto] Item Help PCI 2 IRQ Assignment [Auto] Menu Level PCI 3 IRQ Assignment [Auto] Device(s) using this INT: RAID Cntrlr -Bus 0 Dev 5 Func 0 : Move Enter: Select +/-/PU/PD: Value... -
Page 32: Pc Health Status
PC Health Status CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Item Help Reset Case Open Status [Disabled] Menu Level Case Opened Vcore [Disabled] DDR 2.5V Don't reset case +3.3V open status +12V [Enabled] Current CPU Temperature 27°C Clear case open status Current CPU FAN Speed 4821 RPM... -
Page 33: Mb Intelligent Tweaker (M.i.t.)
MB Intelligent Tweaker (M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2004 Award Software MB Intelligent Tweaker (M.I.T.) Configure DRAM Timing [Auto] Item Help x Cas Latency Setting Menu Level x DRAM RAS Active Time x DRAM RAS Precharge Time [AUTO] x DRAM RAS to CAS Delay Configure DRAM Timing automatically CPU Clock Ratio... - Page 34 CPU Clock (MHz) This option is available only when Linear Frequency Control is enabled. 100~355 Select CPU Clock to 100MHz~355MHz. If you use a FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz. If you use a FSB533 Pentium 4 processor, please set "CPU Clock" to 133MHz. If you use a FSB800 Pentium 4 processor, please set "CPU Clock"...
-
Page 35: Load Fail-Safe Defaults
Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced BIOS Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password Load Fail-Safe Defaults (Y/N)? N PnP/PCI Configurations Save &... -
Page 36: Save & Exit Setup
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.To disable password, just press <Enter> when you are prompted to enter password. A message "PASSWORD DISABLED"... -
Page 37: Chapter 3 Driver Installation
Revision History Chapter 3 Install Drivers Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe. - Page 38 USB 2.0 driver for Windows 98 and Windows ME, we will ® put the driver on GIGABYTE website asap. (http://www.gigabyte.com.tw). For USB 2.0 driver support under Windows XP operating system, please use Windows Service Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller"...
- Page 39 Contact Us Taiwan (Headquarters) Japan GIGA-BYTE TECHNOLOGY CO., LTD. NIPPON GIGA-BYTE CORPORATION Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, WEB address : http://www.gigabyte.co.jp Taiwan Singapore TEL: +886 (2) 8912-4888 GIGA-BYTE SINGAPORE PTE. LTD. FAX: +886 (2) 8912-4003 Tech. Support : Tech.
- Page 40 China Australia NINGBO G.B.T. TECH. TRADING CO., LTD. GIGABYTE TECHNOLOGY PTY. LTD. Tech. Support : Tech. Support : http://cn.giga-byte.com/TechSupport/ServiceCenter.htm http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm Non-Tech. Support (Sales/Marketing) : Non-Tech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.asp http://ggts.gigabyte.com.tw/nontech.asp WEB address : http://www.gigabyte.com.cn WEB address : http://www.giga-byte.com.au Shanghai France TEL: +86-021-63410999 GIGABYTE TECHNOLOGY FRANCES S.A.R.L.