Gigabyte 8S648FXP-RZ User Manual page 15

8) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode.
9) F_PANEL (2 x 10 pins Connector)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
MSG (Message LED/ Power/ Sleep LED)
PW (Power Switch)
SPK (Speaker Connector)
HD (IDE Hard Disk Active LED)
RES (Reset Switch)
NC
Pin No.
1
1
2
3
Message LED/Power/
Sleep LED
Power Switch
2
1
IDE Hard Disk Reset Switch
Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Reset Hardware System
NC
- 15 -
Definition
MPD+
MPD-
MPD-
Speaker Connector
20
19
Hardware Installation Process