Putting Into Operation - R&S NGM200 Getting Started

®
R&S NGL200/NGM200
3

Putting into Operation

This chapter describes how to set up the R&S NGL/NGM power supply series for
the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
● Do not open the instrument casing
● Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument. Note that the basic safety instructions also
contain information on operating conditions that prevent damage to the
instrument
In addition, read and observe the safety instructions in the following sec-
tions.
Notice that the data sheet may specify additional operating conditions.
Risk of radio interference
This instrument is compliant with Class A of CISPR 32. In a residential envi-
ronment, this instrument may cause radio interference.
Getting Started 1178.8720.02 ─ 05
Putting into Operation
9