Gestetner F550 Supplementary Manual page 8

Server Domain Authentication
M M M M
Press the name of the box(user's
authentication ID).
N N N N
Press the { { { { OK} } } } key.
If you do not want to program a
password, proceed to step
Note
❒ For the sender information to
appear, the box name must be
the same as the Windows 2000,
Windows Server 2003, or Win-
dows NT4.0 domain controller
user account.
❒ Each box must have a different
name, to enable correct user no-
tification.
Important
❒ If an unregistered user of a Per-
sonal Box sends e-mail, only the
machine address appears as the
sender information. To display
e-mail address for all users, all
users with Windows 2000, Win-
dows 2003, or Windows NT4.0
domain controller accounts
must be registered in the Per-
sonal Box, using the same user
ID as their Windows log on ac-
count.
❒ If the same authentication ID for
Server Domain Authentication
is registered for more than two
users, these, including "*" and
"#", are referred in SUB code or-
der. The authentication admin-
istrator can check these by
printing out the Box List. See
Chapter 7 "Box Settings" in the
Advanced Features manual.
8
O O O O
Enter the password you want to
program.
P P P P
Press the { { { { OK} } } } key.
Q Q Q Q
Press 0 0 0 0 or 1 1 1 1 to select "Yes".
P
.
R R R R
Press the { { { { OK} } } } key.
S S S S
Specify the Quick Dial key or
Speed Dial in which the delivery
destination is stored.
T T T T
Press the { { { { OK} } } } key.
The address entered as the receiver
is the e-mail address of the fax
sender.
RDS (Remote Diagnostic System)
If your machine has a problem, a ser-
vice representative can perform vari-
o u s d i a g n o s t i c t a s k s o v e r t h e
telephone line from the service sta-
tion to try to find out what is wrong
with your machine. The service repre-
sentative can also use RDS to change
some of your machine's settings, if
you request it.
RDS is active while Server Domain
Authentication is on. The administra-
tor can however disable this function,
to prevent unauthorized access via
RDS.