Panasonic KX-HDV230XB Operating Instructions Manual page 42

Using the Phonebook
11.[D]/[C]: Select the number to use as the default number. a
12.
Save
Note
R Steps 8 and 9 can be omitted if you do not want to assign a category.
R Steps 10 and 11 can be omitted if you do not want to assign a default number. (The first number
entered for an entry will automatically be assigned as the default number.)
R The valid digits are "0" through "9", "G", "B", "J", "P".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see "Entering Characters", Page 28.
Editing a stored item in the Local Phonebook
Editing a Stored Item
[In standby mode]
1.
2. [D]/[C]: "Phonebook" a
3. Enter the name or the first character(s) of the desired name. a
4. [D]/[C]: Select the desired name, phone number, category or default telephone number. a
5. [D]/[C]: "Edit" a
OK
6. Edit the data as necessary. a
7. Repeat step 4 to 6 and edit the items you want to change.
8.
Save
*1 Depending on your service provider, there are cases where this menu does not appear. In this case,
step 2 is skipped.
Note
R To change a character or digit, press [F] or [E] to highlight it, press
the new character or digit.
R To clear an entire line, press and hold
R To move the cursor to the left or right, press [F] or [E] , respectively.
R For details about entering characters, see "Entering Characters", Page 28.
Editing Category Names
You can edit the names of the categories in the phonebook.
[In standby mode]
1.
Menu
2. [D]/[C]: "Basic Settings" a
3. [D]/[C]: "Display Option" a
4. [D]/[C]: "Category Name" a
5. [D]/[C]: Select the desired category number (1–9). a
6. Enter a name for the category (max. 13 characters). a
7. Repeat steps 5 and 6 for each category name to edit.
42
*1
OK
OK
for more than 1 second.
Clear
OK
OK
OK
OK
OK
to delete it, and then enter
Clear
OK
OK
Menu