Panasonic KX-HDV230XB Operating Instructions Manual page 70

Appendix
System Settings Menu Layout
Status
Sub Item
Line Status
R 1–6
Firmware Version
IP Mode
IPv4 Settings
IPv6 Settings
MAC Address
LLDP
VLAN
*1 If you select this item and press
*2 If this item is not set, "0.0.0.0" is displayed. If the telephone is not connected to the network, "..." is
displayed.
*3 If this item is not set, "0::0" is displayed. If the telephone is not connected to the network, "::" is
displayed.
Network Settings
Sub Item
IP Mode Select
IPv4 Settings
70
Description
Displays the line status.
Displays the firmware version
of the telephone.
Displays the IP network mode.
Displays information about IPv4
settings.
Displays information about IPv6
settings.
Displays the MAC address of
the telephone.
Displays the LLDP status.
Displays the VLAN ID and
priority.
, the phone number of the selected line is displayed.
OK
Description
Changes the network settings
of the telephone. Current
settings are displayed as a
highlight.
Specifies the IPv4 settings.
Setting
*1
Registered /
*1
Registering /(NULL)
—
IPv4/IPv6/IPv4&IPv6
*2
–IP Address
*2
–Subnet Mask
*2
–Default Gateway
*2
–DNS
*3
–IP Address
*3
–Prefix
*3
–Default Gateway
*3
–DNS
—
On/Off
—
Setting
–IPv4
–IPv6
–IPv4&IPv6
DHCP
Auto
Manual
–DNS 1
–DNS 2
Static
–IP Address
–Subnet Mask
–Default Gateway
–DNS 1
–DNS 2
Default
—
—
—
—
—
—
—
—
Default
IPv4
DHCP–Auto