Supero X9DBU-iF User Manual page 13

Jumper
JBT1
2 2
JI C1/JI C2
JPB1
JPG1
JPL1
JPME1
JPME2
JWD1
Connectors Description
Buzzer Internal Buzzer
COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header
FAN1~4, FANA/B CPU/System Fan Headers
IPMB1 4-pin External BMC I
I-SATA 0~5 Intel PCH SATA Connectors 0~5 (SATA 3.0 Ports 0/1, SATA 2.0
Ports 2~5)
JBAT1 Onboard Battery (See Chpt. 4 for Used Battery Disposal)
JD1 Power LED/Speaker (PWR LED Pins 1~3, Speaker: Pins 4~7)
JF1 Front Panel Control Header
JL1 Chassis Intrusion
JOH1 Overheat/Fan Fail LED
2
JPI C1 Power Supply SMBbus I
JPW1 ATX 24-Pin Power Connector (See Warning on Pg. 1-6.)
JPW2~JPW3 12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JPW4 4-Pin Power Connector
JSTBY1 Standby
JTAG of CPLD JTAG of CPLD (Complex Programming Logical Device)
JTPM1 TPM (Trusted Platform Module)/Port 80
JSD1 SATA DOM (Device On Module) Power Connector
KB/Mouse Keyboard/Mouse
LAN1/2 G-bit Ethernet Ports 1/2
(IPMI) LAN IPMI Dedicated LAN
X9DBU-3F/X9DBU-iF Jumpers
Description
Clear CMOS
SMB to PCI-E Slots
BMC Enable
VGA Enable
LAN1/LAN2 Enable
Management Engine (ME)
Recovery Mode
Management Engine (ME)
Manufacture Mode
Watch Dog
X9DBU-3F/X9DBU-iF Connectors
2
C Header (for an IPMI Card)
2
C Header
1-5
Chapter 1: Overview
Default Setting
See Chapter 3
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Normal)
Pins 1-2 (Reset)