Table of Contents
Advertisement
❖ ❖ ❖ ❖ Reception Protocol
Specify Reception Protocol for re-
ceiving Internet faxes.
• Off
• POP3
• SMTP
Note
❒ Default: Off
❖ ❖ ❖ ❖ POP3 Setting
Specify the POP3 [Server Name] for
receiving Internet faxes.
The specified POP3 server name is
used for [POP before SMTP].
If DNS is in use, enter the host
name.
If DNS is not in use, enter the POP3
or server IP address.
• Server Name
• VEncryption
• Auto
• On
• Off
Limitation
❒ Enter POP3 [Server Name] using
up to 127 alphanumeric charac-
ters. Spaces cannot be used.
Note
❒ VEncryption-[Auto]: Password
encryption is automatically set
according to the POP server set-
tings.
❒ VEncryption-[On]: Encrypt pass-
word.
❒ VEncryption-[Off]: Do not encrypt
password.
Setting Up the Machine on a Network
❖ ❖ ❖ ❖ Administrator's E-mail Address
On e-mailed scanned documents,
if the sender is not specified this
appears as the sender's address.
This can be used as the sender with
SMTP authentication for Internet
Fax. If [On] is selected for [SMTP Au-
thentication] be sure to enter the ad-
ministrator's e-mail address here.
This can be used as the destination
for data transmission result cc e-
mails, as well as the destination for
data communication management
e-mail.
Limitation
❒ Enter up to 128 alphanumeric
characters.
❖ ❖ ❖ ❖ E-mail Communication Port
Specify the [POP3] port numbers
for receiving Internet faxes.
The specified POP3 port number is
used for [POP before SMTP].
• POP3: 110
Note
❒ Default: POP3/110
❒ Enter a port number between 1
and 65535 using the number
keys, and then press the [#
key.
❖ ❖ ❖ ❖ E-mail Reception Interval
Specify, in minutes, the time limit
for receiving Internet faxes via
POP3 or IMAP4 server.
• On: 15 minute(s)
• Off
Note
❒ Default: On/15 minute(s)
❒ If [On] is selected, the number of
times can be set from 1 to 1440
in increments of one minute, us-
ing the number keys.
2
# ]
#
#
43
Advertisement
Table of Contents
