Table of Contents
Advertisement
Connecting and Setting Up
Limitation
❒ Enter [User Name] using up to
191 alphanumeric characters.
Spaces cannot be used.
❒ Depending on the SMTP server
type, "realm" must be specified.
Add "@" after the user name, as
2
in "user name@realm".
❒ Enter [Password] using up to 63
alphanumeric characters. Spac-
es cannot be used.
❒ Enter the user name and pass-
word to be set for [Administra-
tor's E-mail Address] when using
Internet Fax.
Note
❒ Default: Off
❒ [V V V V Encryption]-[Auto]: If the authen-
tication method is PLAIN ,
LOGIN, CRAM-MD5, or DI-
GEST-MD5.
❒ [V V V V Encryption]-[On]: If the authenti-
cation method is CRAM-MD5 or
DIGEST-MD5.
❒ [V V V V Encryption]-[Off]: If the authenti-
cation method is PLAIN, or
LOGIN.
42
❖ ❖ ❖ ❖ POP before SMTP
You can configure POP authentica-
tion (POP before SMTP).
Authentication prevents unau-
thorized access, by authenticating
with the POP server before send-
ing e-mail to the SMTP server.
• On
To enable POP server authenti-
cation before sending e-mail via
the SMTP server, set [POP before
SMTP] to [On].
E-mail is sent to the SMTP serv-
er after the time specified for
[V V V V Wait Time after Auth.] has
elapsed.
• VWait Time after Auth.: 300msec
• User Name
• E-mail Address
• Password
• Off
Limitation
❒ Enter [User Name] using up to 63
alphanumeric characters. Spac-
es cannot be used.
❒ Enter [Password] using up to 63
alphanumeric characters. Spac-
es cannot be used.
Note
❒ Default: Off
❒ Using the number keys, you can
set [V V V V Wait Time after Auth.] from
zero to 10,000 milliseconds, in
increments of one millisecond.
❒ If you select [On], enter [Server
Name] in [POP3 Setting]. Also,
check the po rt numb er fo r
[POP3] in [E-mail Communication
Port].
Advertisement
Table of Contents
