Connecting Via Wireless Lan (Usb) - JVC KY-PZ1OOWE Instructions Manual

Connecting via Wireless LAN (USB)

Connection via Access Point
1 Perform setting on the camera recorder,
and start up the [USB Wizard] screen.
(A P75 [Connecting to Network via [USB]
Terminal] )
2 [Wireless LAN] appears on the [USB
Wizard] screen.
Available Adapter
Wireless LAN
Back
.
3 Press the I button to display the [Select
Connection Type] screen.
Select "Connect with Access Point".
Follow the screen instructions to complete
setting. Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID, type of encryption, Passphrase, and
IP Address setting ("DHCP" or "Manual") in
cases other than WPS
Select Connection Type
P2P
Connect with Access Point
Back
.
4 Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
(A P87 [Changing Settings] )
76
Network Connection
Next
3
Next
P2P Connection
For direct access to the network feature of the
camera from a PC.
1 [Wireless LAN] appears on the [Wizard]
screen.
Available Adapter
Wireless LAN
Back
.
2 Press the I button to display the [Select
Connection Type] screen.
Select "P2P".
Follow the screen instructions to complete
setting.
Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID and Passphrase in cases other than
WPS
Select Connection Type
P2P
Connect with Access Point
Back
.
Memo :
When "WPS" is selected in the [Select Setup
0
Type] screen, the following steps 3 and 4 are not
required.
3 Display the [USB] screen of the status
screen.
Press the [MENU] button on the infrared
0
remote control twice to display the status
screen.
Press the cross-shaped button (HI) to
display the [USB] screen.
Check to ensure that the [SSID] and
0
[Passphrase] that you have set in the wizard
are displayed.
Next
2
Next