JVC KY-PZ1OOWE Instructions Manual page 68

Loop Rec
For setting whether to enable the loop recording
mode.
(A P51 [Loop Recording] )
[Setting Values: On, ROff]
Memo :
The setting cannot be altered during recording.
0
4GB File Spanning(SDXC)
A recording file is automatically split when the size
exceeds 4 GB, but if a microSDXC card is used,
you can record clips larger than 4 GB by setting this
option to "Off". (Up to a maximum of 64 GB or 4
hours)
On:
0
Splits a file when it exceeds 4 GB or 30 minutes.
Off:
0
Splits a file when it exceeds 64 GB or 4 hours.
[Setting Values: ROn, Off]
Memo :
When [Loop Rec] is set to "On", [4GB File
0
Spanning(SDXC)] is also automatically set to
"On".
To use a microSDHC card, set [4GB File
0
Spanning(SDXC)] to "On".
This option is only valid if the microSD card used
0
for recording is of the SDXC format.
LPCM
For setting the audio recording format.
[Setting Values: Dual Mono, RStereo]
Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
The date/time display style can be changed in
0
[Main Menu] B [System] B [Date Style]/[Time
Style].
(A P65 [ Date Style ] )
(A P66 [ Time Style ] )
68
System Menu
Clip Set
9 Clip Name Prefix
For setting the first four characters of the name of
the clip file to be recorded to the microSD card.
Enter any of the 36 characters including alphabets
(upper case) and numbers (0 to 9) using the
software keyboard.
(A P53 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
Memo :
This setting will not be applied to the name of the
0
clip file, but will be recorded as a display name
for the clips that appear in the clip list.
9 Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (Set) to
reset the number.
When other clips exist on the microSD card, the
smallest available number is used after reset.
Example:
0
If [Clip Name Prefix] is "ABCD", and
"ABCD0001" already exists on the microSD
card, "ABCD0002" will be assigned.
Clear Planning Metadata
Erases the planning metadata.