Changing Usb Connection Settings - JVC KY-PZ1OOWE Instructions Manual

Changing USB Connection Settings

You can change the settings for each of the preset
items on the [USB Wizard] screen of the camera
recorder.
Items that cannot be changed are grayed out
0
according to the type of adapter connected and
the mode of connection.
.
A Type of Adapter Connected
B Mode of Wireless LAN Connection
C [Search Access Point] Button
Click to display a list of the detected access
points.
A check mark ( ) appears at the beginning of
the access point that is currently selected.
.
D For configuring information required for
connecting to a wireless LAN access point.
E IP Address Configuration
When "DHCP" is selected, all items will be
grayed out.
F Settings when using cellular adapter
G [OK]/[Cancel] Button
After changing of settings is complete, click the
A
[OK] button.
B
Clicking [Execute] on the confirmation screen
C
changes the settings on the camera and
D
restarts the network.
Memo :
You can run [Search Access Point] only when
0
E
the setting screen is displayed by connecting to
the network using the LAN terminal or when it is
displayed via an access point by connecting to
the network using the USB terminal.
F
G
89
Changing Settings