Shipping condition
It is possible to reset the following data to the factory
settings.
Settings and set values of [Picture], [Sound], [Setup],
[Position] and [Options] menus, internal LightID and user
image registered in [Setup] - [Image settings]
■
Remote control
1
Press <SETUP> to display the [Setup]
menu.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
The following screen will be displayed.
Options
Display software information
Software licenses
USB data cloning
LAN data cloning
Shipping
3
Select [Shipping] with
<ENTER>.
YES
4
Select [YES] with
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5
After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button> (
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
124
English
and press
Shipping
NO
and press
).
■
Unit
1
Press <MENU (Unit)> for several
times and display the [Setup] menu.
2
Select [Menu display duration] with
, and then press and hold <ENTER
(Unit)> for more than 5 seconds.
3
Select [YES] with <- (Unit)> and press
<ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4
After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button> (
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
).