Page 1
22-INCH | 15-AMP | LED LIGHTS OPERATOR’S MANUAL Model SJ627E-RM A Division of Snow Joe , LLC ® Form No. SJ-SJ627E-RM-880E-V1 THANKS YOUR PURCHASE OF A REMANUFACTURED PRODUCT. To make sure you get the most out of your product, be sure to register online at snowjoe.com...
OPERATOR’S MANUAL Model SJ627E-RM A Division of Snow Joe , LLC ® Form No. SJ-SJ627E-RM-880E-V1 IMPORTANT! 6. Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts. Never carry the snow Safety Instructions thrower by its cord or yank the cord to disconnect it from the electrical outlet.
SJTW-A 14-gauge 50-foot extension cord will draw. An undersized cord will cause a drop in line ® with lighted end (Model PJEXT50-B). Visit snowjoe. voltage resulting in loss of power and overheating. com to purchase this extension cord online or, to 3.
+ Sun Joe customer service ® ® center at 1-866-SNOWJOE (1-866-766-9563). • Noise control – When using the snow thrower, you must respect local laws and regulations regarding noise control and environmental protection. To avoid noise disturbance, you should carefully decide upon an appropriate operation...
Page 5
• When work is completed – Disconnect the snow thrower from the power source when not in use, when changing accessories, and before performing any maintenance function. • Store safely – Store the snow thrower indoors in a dry area between uses. Keep it in a locked area, where children and unauthorized users cannot gain access.
Safety Symbols The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Disconnect the plug before conducting maintenance or when it is and follow all instructions in the...
Know Your Electric Snow Thrower Read the owner’s manual and safety rules carefully before operating your electric snow thrower. Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
+ Sun Joe customer service ® ® Knob + bolt center at 1-866-SNOWJOE (1-866-766-9563) for assistance. Handle with care during assembly so that electrical wiring does Lower frame not become damaged. 3. Secure the connection of the upper frame to the middle frame by fastening the second set knobs and bolts on each side (Fig.
Chute Crank Assembly Fig. 3 1. Slide the upper chute crank through the rubber ring located on the middle frame (Fig. 6). Upper Fig. 6 frame Upper chute crank Knob + T-bolt Rubber ring Middle frame Discharge Chute Assembly 1. Loosen the knob to lift the chute deflector (Fig. 4). 2.
® ® ® NOTE: Before using this machine, make sure that the power service center at 1-866-SNOWJOE (1-866-766-9563). source you will use complies with the specifications detailed in this manual. Before inserting the plug into the socket, verify Powering On + Off that the snow thrower’s auger and rubber plates are firmly...
Page 11
Headlights 6. While moving the snow thrower, do not drag the power cable violently or roughly. The snow thrower should move The snow thrower is equipped with 2 headlights that can be within the range that the cable can reach. used to illuminate the forward path in the dark.
Fig. 14 Fig. 16 Chute crank Deflector knob WARNING! Make sure that the chute deflector snaps Discharge chute and locks completely onto the discharge chute. An opening between the discharge chute and the chute deflector may allow foreign objects to be picked up by the snow thrower and thrown in the direction of the operator causing serious boldly injury.
Page 13
5. Do not use detergent or solvents as these could cause Fig. 19 irreparable damage to the snow thrower. Chemicals can destroy the plastic parts. Metal frame 6. To protect the snow thrower from corrosion when storing for long periods, lightly oil the metal parts. 7.
Page 14
Replacing the Belt + Pulley Fig. 24 NOTE: Determine the left and right hand side of the snow thrower by standing behind the unit in the normal operating position. Screw 1. Remove the screws from the left panel of the snow thrower and remove the left panel (Fig.
Cover loosely with a tarp or with the Snow Joe universal 24-inch electric snow ® thrower cover (Model SJCVR-24) for added protection. Visit snowjoe.com to purchase the cover online. Service + Support If your Snow Joe SJ627E-RM electric snow thrower requires ®...
Page 16
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
Page 19
We’re here to help Monday through Friday from 9AM to 6PM EST. You can reach us at 1-866-SNOWJOE (1-866-766-9563), online EXCLUSIONS: at snowjoe.com, via email at help@snowjoe.com or tweet us • Wearing parts like belts, augers, chains and tines are @snowjoe.
Need help?
Do you have a question about the SJ627E-RM and is the answer not in the manual?
Questions and answers