Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 95 Monday, June 11, 2001 5:02 PM
Date Stamp
The optional stamp board and HDD are required to use this function.
Preparation
Specify the print position (Top
left/Top centre/Top right/Bottom
left/Bottom centre/Bottom right)
and print direction (Horizontal/
Vertical).
❖ ❖ ❖ ❖ Place your originals, and then
specify the date stamp position
and direction.
Limitation
❒ You cannot use the bypass tray.
❒ You can print on paper sizes up to
A0.
Note
❒ You can change the date format of
the date stamp. See p.136 "Date
Stamp Format Priority"
2002.2.12
❒ You can also set and change the
other date stamp conditions. See
p.136 "Date Stamp Format Priori-
ty"
❒ You can use the date stamp with
(up to two) other user stamps.
ZEDG250E
❒ The date set in "Time Settings" is
used for the date stamp. See the
System Settings manual.
A
Press the [Stamp] key.
B
Press the [Date Stamp ] key.
Date Stamp
2
95
Advertisement
Table of Contents
