Table of Contents
Advertisement
DolphinGB-Copy-F_V4_FM.book Page 117 Monday, June 11, 2001 5:02 PM
Paper Misfeeds
R CAUTION:
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
R CAUTION:
• Be careful when replacing the roll paper or removing misfed paper by follow-
ing the operating instructions properly. Otherwise, an injury may result from
the paper cutter inside.
Important
❒ xDo not open the covers, paper path section or paper roll tray immediately
after the paper misfeed display blinks or comes on. Wait 10 seconds before
opening them. If you open them immediately, it will be difficult to remove
paper trapped in the fusing unit.
❒ Completely remove the jammed paper, taking care not to tear it. If scraps of
paper are left in the machine, the originals will jam again or the machine may
be damaged.
❒ If the paper misfeeds again, immediately call your service representative.
Note
❒ Paper jam locations may be displayed in more than one place. In these cases,
check all the locations indicated.
❒ Instructions for clearing paper jams in the copy output area and paper roll
tray are contained in the stickers on the machine.
xClearing Misfeeds
3
117
Advertisement
Table of Contents
