Gestetner AO70 Copy Manual page 57

DolphinGB-Copy-F_V4_FM.book Page 127 Monday, June 11, 2001 5:02 PM
❖ ❖ ❖ ❖ Auto Image Density Priority
Specifies whether Auto Image Density should be used after the machine is
turned on, after Auto Reset, or after the {Clear Modes/Energy Saver} key has
been pressed, or not. See p.41 "Adjusting Copy Image Density"
• On
• Off
Note
❒ Default: On
❖ ❖ ❖ ❖ Density Priority
Specified one of seven density levels as the image density.
Note
❒ Default: Center
❖ ❖ ❖ ❖ Auto Paper Select Priority
Specifies whether Auto Paper Select should be used after the machine is
turned on, after Auto Reset, or after the {Clear Modes/Energy Saver} key has
been pressed, or not. See p.42 "Selecting Copy Paper"
• On
• Off
Note
❒ Default: On
❖ ❖ ❖ ❖ Paper Roll Priority
Specifies the default paper roll to be used after the machine is turned on, after
Auto Reset, or after the {Clear Modes/Energy Saver} key has been pressed.
• Paper Roll 1
• Paper Roll 2
• Paper Roll 3 (option)
Note
❒ Default: Paper Roll 1
Settings You Can Change with the User Tools
4
127