Saving A Frame From A Movie As A Still Image - Nikon VQA091AA Reference Manual

5
Use HI to select m (save) and press
the k button.
Follow the instructions on the screen to save the
movie.
B
Notes About Movie Extracting
A movie that was created by editing cannot be edited again.
The actual trimmed portion of a movie may differ slightly from the portion selected using
the start and end points.
Movies cannot be trimmed so that they are less than two seconds long.

Saving a Frame from a Movie as a Still Image

The desired frame of a recorded movie can be extracted and saved as a still image.
Pause a movie and display the frame to be extracted
(A83).
Use the multi selector JK to select the H control
and press the k button.
Select Yes when a confirmation dialog is displayed,
and press the k button to save the image.
The image quality of the still images to be saved is
normal (compression ratio of approximately 1:8).
The image size is determined by the original movie
image size (A117).
B
Restrictions on Extracting Still Images
Still images cannot be extracted from a movie recorded with Z 1080/60i, U 1080/
50i, g 480/30p, W 480/25p, or an HS movie option.
Movies
Editing Movies
85
Save
3 0 s 3 0 s
1 m 3 0 s 1 m 3 0 s
Copy this frame as a still image?
Yes
No