Saving A Frame From A Movie As A Still Image - Nikon Coolpix L840 Reference Manual

Hide thumbs Also See for Coolpix L840:
Table of Contents

Advertisement

5
Use HI to select m (save) and
press the k button.
• Follow the instructions on the screen to
save the movie.
B
Notes About Movie Editing
• Use batteries with a sufficient amount of charge remaining to prevent the camera
from turning off during editing. When the battery level indicator is B, movie
editing is not possible.
• A movie that was created by editing cannot be trimmed again.
• The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.

Saving a Frame from a Movie as a Still Image

A frame from a recorded movie can be extracted and saved as a still image.
• Pause movie playback so that the frame to be
extracted is displayed (A72).
• Use the multi selector JK to select H in
the playback controls, and then press the
k button.
• When the confirmation dialog is displayed,
select Yes and press the k button to save.
• The image quality of the still images to be
saved is normal (compression ratio of
approximately 1:8). The size of the image
varies depending on the type (image size;
A98) of the original movie.
For example, a still image saved from a movie
recorded with e 1080/30p or
S 1080/25p is n (1920 × 1080 pixels).
B
Notes About Saving Still Images
Still images cannot be saved from movies recorded at Z 1080/60i, U 1080/
50i, or HS movie (A98).
74
Save
3 0 s
1 m 3 0 s
1 m 3 0 s
Copy this frame as a still image?
Yes
No

Advertisement

Table of Contents
loading

Table of Contents