Charging The Battery - Nikon VQA091AA Reference Manual

Charging the Battery

Power-on lamp (charge lamp)
* A plug adapter is attached depending on the country or region of purchase. The
shape of the plug adapter varies with the country or region of purchase.
Charging starts when the camera is connected to an electrical outlet while the
battery is inserted, as shown in the illustration. The power-on lamp (charge lamp)
slowly flashes while the battery is charging.
When charging is complete, the power-on lamp (charge lamp) turns off. Unplug the
Charging AC Adapter from the electrical outlet, and disconnect the USB cable.
Charging time is about 2 hours for a fully exhausted battery.
The battery cannot be charged when the power-on lamp (charge lamp) quickly
flashes, possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
B
Notes About the USB Cable
Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire, or electric shock.
Check the shape and direction of the plugs and do not insert or remove the plugs at an
angle.
Getting Started
Charging the Battery
Charging AC Adapter*
USB cable (included)
13
Electrical outlet