Nikon VQA091AA Reference Manual page 168

External Device Issues
Problem
Cannot select
Connect to smart
1
device. /Cannot pair
with a smart device
using Connect to
1
smart device.
Paired smart devices
are not connected
through Bluetooth
1
automatically.
If There Is a Problem
Troubleshooting
Cause/Solution
When establishing a wireless connection for the
first time, see the included "SnapBridge Connection
Guide".
Use a sufficiently charged battery.
Insert a memory card with sufficient free space into
the camera.
Disconnect the HDMI cable or USB cable.
Set the following in Network menu in the camera.
- Airplane mode: Off
- Choose connection: Smart device
- Bluetooth M Connection: Enable
Enable Bluetooth on the smart device.
Set the following in Network menu in the camera.
- Airplane mode: Off
- Choose connection: Smart device
- Bluetooth M Connection: Enable
If the camera is paired with multiple smart devices,
select the smart device you want to connect in
Network menu M Bluetooth M Paired devices
in the camera.
If multiple cameras are registered in the SnapBridge
app, switch to the camera you want to connect
using the SnapBridge app.
154
A
–
–
12
87
129
–
129
131
–