Nikon VQA091AA Reference Manual page 170

Problem
Cannot select
Connection to remote.
Cannot use Connection
to remote to pair with the
ML-L7 Remote Control.
The camera does not
respond when
operating the ML-L7
2
Remote Control.
Images are not
displayed on TV.
Nikon Transfer 2 does
not start when the
camera is connected
to a computer.
The PictBridge screen
is not displayed when
the camera is
connected to a printer.
Images to be printed
are not displayed.
Cannot select paper
size with the camera.
1
See the included "SnapBridge Connection Guide" and SnapBridge online help.
2
Refer to the User's Manual provided with the ML-L7 Remote Control (available separately).
If There Is a Problem
Troubleshooting
Use a sufficiently charged battery.
2
/ Set the following in Network menu in the camera.
- Airplane mode: Off
- Choose connection: Remote control
2
- Bluetooth M Connection: Enable
The camera is not connected to the ML-L7 Remote
Control (available separately). Press the power
button on the remote control to establish the
connection. If M is not displayed on the shooting
screen, perform pairing again.
The remote control can be used only for shooting
operations.
The w1/w2 buttons on the remote control
cannot be used with this camera.
A computer or printer is connected to the camera.
The memory card contains no images.
Remove the memory card to play back images in
the internal memory.
The camera is off.
The battery is exhausted.
The USB cable is not correctly connected.
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer
2, refer to help information contained in ViewNX-i.
With some PictBridge-compatible printers, the PictBridge
startup screen may not be displayed and it may be
impossible to print images when Auto is selected for
Charge by computer in the setup menu. Set Charge by
computer to Off and reconnect the camera to the printer.
The memory card contains no images.
Remove the memory card to print images in the
internal memory.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select the paper size.
The printer does not support the paper sizes
specified by the camera.
The printer automatically selects the paper size.
Cause/Solution
156
A
–
129
175
173
173
–
–
12
–
87
87, 93
–
–
145
–
12
–