Basic Procedure
A
Make sure that the machine is in Copy mode.
If the machine is not in Copy mode, press the {Copy/New Job} key.
B
When the machine is set for the user code, enter the user code with the
number keys and then press the {#} key.
Reference
P.90 "User Codes".
C
Make sure that there are no previous settings remaining.
Note
To clear settings, press the {Clear Modes/Energy Saver} key.
D
Set your originals.
Reference
P.31 "Setting Originals".
E
Set your desired settings.
F
Enter the number of copies required with the number keys.
Enter
Sample Copy
Start
Clear/Stop
TSPS020N
2. Copying
29