Setting Originals In The Document Feeder - Gestetner 5502 Copy Reference Manual

Copying
B
Set the original face down on the exposure glass. The original should be
aligned to the rear left corner.
1
2
1: Reference mark
2: Scale
Note
Start with the first page to be copied.
C
Lower the document feeder.

Setting Originals in the Document Feeder

Note
The last page should be on the bottom.
Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
When copying thin originals (40 – 52g/m
in the document feeder at a time or place it on the exposure glass to avoid
damage due to a multi-sheet feed (several pages fed together at the same
time).
The original might become dirty if it is written with a pencil or similar tools.
Usually, one-sided originals are delivered to the ADF external tray, and two-
sided originals to the ADF tray.
Reference
Regarding originals that the document feeder can handle, see
nals".
32
2
ND1C01EE
2
, 11 – 14 lb. Bond), set one original
P.19 "Origi-