Table of Contents
Advertisement
Basics
Starting the Machine
A
Press the operation switch to make the On indicator go on.
1
The display panel will come on.
Interrupt
Sample Copy
Start
top
Note
If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
During the warm-up period (less than 330 seconds), you can use the Auto
Start function. See
You can set up a copy job and press the {Start} key while the "Select modes
and press the start key. Scanning originals can be started." message is dis-
played.
When "Input user code, then press # ." is displayed, enter your user code.
See
Shutting Down the Machine
A
Press the operation switch to make the On indicator go off.
Turning Off the Main Power
A
Turn off the main power switch.
The main power indicator of the control panel goes off.
18
On
Main Power
P.90 "Auto Start".
P.90 "User Codes".
TSPS010N
Advertisement
Table of Contents
