Advertisement

Quick Links

WOOD
Fireplace
Insert
Owners & Installation Manual
www.regency-fire.com
MODELS: I2403M
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
919-051c
01.30.18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I2403M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Regency Fireplace Products I2403M

  • Page 1 Fireplace Insert Owners & Installation Manual www.regency-fire.com MODELS: I2403M Installer: Please complete the details on the back cover and leave this manual with the homeowner. Homeowner: Please keep these instructions for future reference. FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4 919-051c 01.30.18...
  • Page 2 The authority having jurisdiction should be consulted before installation to determine the need to obtain a permit. Regency I2403M...
  • Page 3: Table Of Contents

    Flue Baffle & Secondary Air Tube Installation .....13 Door Handle ..............13 Screen Door ..............13 First Fire ..............14 ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENTS. Regency I2403M...
  • Page 4: Safety Label

    Regency Insert. We have printed a copy of the contents here for your review. NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one. Regency I2403M...
  • Page 5: Unit Dimensions

    DIMENSIONS Regency I2403M...
  • Page 6: Installation

    Emissions from burning wood or gas could contain chemicals known to the State of Cali- fornia to cause cancer, birth defects or other reproductive harm. Regency I2403M...
  • Page 7: Installing Your Insert

    Position the grill on the inside bodyface side and fasten using the bolts, washers and nuts View from Rear of Insert Note: The grill has a front and rear, the holes on the front side have rounded edges and the rear holes have flat edges. Regency I2403M...
  • Page 8: Masonry And Factory Built Fireplace Clearances

    Compare proposed system R of 1.231 to Thermal Resistance: R = 1/k x T = 1/0.84 x .75 = 0.893. specified R of 0.893. Since proposed system R is greater than required, the system is )(hr)( )(K) acceptable. Regency I2403M...
  • Page 9: Flue Connector Bracket

    Regency highly recommends the use of a full built fireplaces. liner as the safest installation and provides the most optimum performance. Your retailer should be able to help you decide which system would Flush Inserts Regency I2403M...
  • Page 10: Stainless Smoke Deflector Installation

    To replace the deflector, loosen off both bolts and slide defector upward and out. Install new defector and hand tighten bolts. Ensure positive location of the defector prior to hand tightening. WARNING: Operation of the unit with out proper installation of smoke deflector will void warranty. Ensure defector is seated so bolts are situated at the top of the keyhole before tightening. Regency I2403M...
  • Page 11: Installation Of The Faceplate And Trim

    The faceplate trim may be installed to the edge of the faceplate at this time. Faceplate Assembly Regency I2403M...
  • Page 12: Installation Of The Fan/Blower

    Ground wire from power cord Wire98gr.eps updated Jan. 27/00 updated: Aug. 09/05 Neutral capitalized the word Nut Green Manual/ Live Ground Auto 120V AC Switch Switch 60 Hz Fan Thermodisc (normally open) Black Black Black Ground Blower/Fan Wiring Diagram Regency I2403M...
  • Page 13: Floor Protection

    Use a pair of vise grips or pliers and tap it into place with a hammer. A tighter fit will Handle at 10 o'clock position. Regency I2403M...
  • Page 14: First Fire

    Chemically treated fire logs also must not 8) Do not place anything on the insert top be burned in your insert. during the curing process. This may result in damage to your paint finish. Regency I2403M...
  • Page 15: Wood Storage

    (3mm / 1/8" or more) it should be removed to reduce the risk of a chimney fire. Regency I2403M...
  • Page 16: Maintenance

    Do not substitute materials. If your glass door does break, do not continue to use your unit until it has been replaced. Avoid impact on glass doors such as striking or slamming shut. Regency I2403M...
  • Page 17: Parts List

    PARTS LIST MAIN ASSEMBLY & OPTIONS I2403M Part # Description Part # Description Part # Description 850-152 Door Assy - Large Gold 142-917 Fan Assembly 42) 163-932 Convection Grill - Gold (Opt) 850-151 Door Assy - Large Black 24) 910-157/P Fan Motor 120 Volts...
  • Page 18: Faceplates

    PARTS LIST FACEPLATES I2403M Part # Description 140-911 Faceplate & Trim Set - Regular 180-570 Black Trim Regular (set of 3) 285) * Trim Right Regular 286) * Trim Top Regular 287) * Trim Left Regular 288) * Faceplate Side Regular...
  • Page 19: Brick Panels

    PARTS LIST BRICK PANELS I2403M Part # Description 180-960 Firebrick - Complete Set 70) 902-111 Brick Regular Full Size: 1-1/4" x 4-1/2" x 9" 75) * Brick Partial: 1-1/4 x 4-1/2" x 2" 76) * Brick Partial: 1-1/4" x 2" x 9"...
  • Page 20: Warranty

    At all times FPI reserves the right to inspect reported complaints on location in the field claimed to be defective prior to processing or authorizing of any claim. Failure to allow this upon request will void the warranty. Regency I2403M Revision Date: December 2016...
  • Page 21 Freight damages for products or parts are not covered under the terms of the warranty. Products made or provided by other manufacturers and used in conjunction with the FPI appliance without prior authorization from FPI may void this warranty. Revision Date: December 2016 Regency Wood Products Warranty Regency I2403M...
  • Page 22 Thank you for choosing a Regency Fireplace. Regency strives to be a world leader in the design, manufacture, and marketing of hearth products. To provide the best support for your product, we request that you complete a product registration form at http://www.regency-fire.com/Customer-Care/Warranty-Registration.aspx within ninety (90) days of purchase. Regency I2403M...
  • Page 23 For fireplace care and tips and answers to most common questions please visit our Customer Care section on our Web Site. Please feel free to contact your selling dealer if you have any questions about your Regency product. Regency I2403M...
  • Page 25 NOTES Regency I2403M...
  • Page 26 NOTES Regency I2403M...
  • Page 28 Installer: Please complete the following information Dealer Name & Address: ______________________________________________ ___________________________________________________________________ Installer: ___________________________________________________________ Phone #: ___________________________________________________________ Date Installed: ______________________________________________________ Serial No.: __________________________________________________________ Regency and Classic are trademarks of FPI Fireplace Products International Ltd. Printed in Canada © Copyright 2018, FPI Fireplace Products International Ltd. All rights reserved.

Table of Contents