Oki MC300 User Manual page 99

DRD
This mode allows the machine to detect a distinctive ring if it has been enabled on the
phone line. In this mode, the machine distinguishes the DRD type of the sender. The
machine then answers only when it matches the registered DRD type.
There are several type of DRD ring pattern. The length of ring ON time and ring OFF time
is different. It depends on the Country Code. Please set the Country Code and DRD Type
for your suitable DRD ring pattern. You can register up to four DRD types.
Country Code: except New Zealand, Australia and Hong Kong (This pattern is to apply to
America's DRD.)
Type 1: 2 sec ON - 4 sec OFF repeat
Type 2: 0.8 sec ON - 0.4 sec OFF - 0.8 sec ON - 4 sec OFF repeat
Type 3: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.8 sec ON - 4 sec OFF repeat
Type 4: 0.3 sec ON - 0.2 sec OFF - 1 sec ON - 0.2 sec OFF - 0.3 sec ON - 4 sec OFF repeat
Country Code: New Zealand (This pattern is to apply to New Zealand's DRD.)
Type 1: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 2 sec OFF repeat
Type 2: 0.4 sec ON - 2.6 sec OFF repeat
Type 3: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 1.4 sec OFF repeat
Type 4: 0.4 sec ON - 0.8 sec OFF - 0.4 sec ON - 1.4 sec OFF repeat
Country Code: Australia (This pattern is to apply to Australia's DRD.)
Type 1: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 2 sec OFF repeat
Type 2: 0.2 sec ON - 0.4 sec OFF - 0.2 sec ON - 0.4 sec OFF - 0.2 sec ON - 1.6 sec OFF repeat
Country Code: Hong Kong (This pattern is to apply to Hong Kong's DRD.)
Type 1: 1.2 sec ON - 3 sec OFF repeat
Type 2: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.8 sec ON - 0.4 sec OFF repeat
Type 3: 0.5 sec ON - 0.5 sec OFF - 1 sec ON - 0.5 sec OFF - 0.5 sec ON - 3 sec OFF repeat.
Printing received faxes
The machine automatically prints out the received fax.
NOTE
> Use only standard or recycled paper.
> Available paper sizes are A4, letter, or legal.
Images larger than the specified paper are reduced, discarded, or printed onto multiple sheets
of paper depending on the reception print settings.
If the machine cannot print received faxes due to a lack of paper or a paper jam, it will
store the received fax data temporarily it's memory. When the problem is resolved, it starts
printing automatically.
NOTE
For details on how to load paper, refer to
For details on how to clear paper jams, refer to
To check the reception history, refer to
"Loading paper" on page
"Clearing paper jams" on page
"Rx History" on page
Faxing > 99
33.
127.
89.