Oki MC300 User Manual page 48

FEATURE OPTION
Image Density
Settings
Document Type
Resolution For Color
Background Removal
Contrast
Hue
Saturation
RGB
Direction Portrait, Landscape
N-In-1 OFF
2-in-1
4-in-1: Vertical
4-in-1: Horizontal
Repeat OFF
x2
x4
ID Card Copy ON, OFF
DESCRIPTION
-3, -2, -1, 0, +1, Adjust density
+2, +3
Darker: Keep color intensity and
darker image.
Lighter: Reduce color intensity and
gives lighter image.
Text, Text&Photo, Allows you to specify the type of
Photo, Photo images on the document.
(Glossy)
Normal, Extra Fine Allows you to select the scanning
resolution. The Extra Fine setting
reproduces a higher resolution image
with greater detail, however this
requires more disk space.
Note: In Mono copy mode, the
resolution is fixed to Extra Fine.
OFF, 1, 2, 3, 4, 5, 6 Allows you to block out the color
background of the image (assuming
document has a color background) -
such that the background color is not
printed.
-3, -2, -1, 0, +1, Contrast setting
+2, +3
High: Enhance brightness
Low: Reduce brightness
-3, -2, -1, 0, +1, Red/green balance adjustment.
+2, +3
Low: Enhance red.
High: Enhance green.
-3, -2, -1, 0, +1, Saturation setting
+2, +3
High: Enhance image sharpness
Low: Reduce hue
Red: -3, -2, -1, 0, Adjust RGB contrast settings. Use the
+1, +2, +3 arrow keys to increment and
decrement the values and to move to
Green: -3, -2, -1, 0,
the next color setting.
+1, +2, +3
Blue: -3, -2, -1, 0,
+1, +2, +3
Selects the default page orientation.
Allows you to print multiple pages of
the document to a single sheet of
paper.
2-n-1 layout orientation and image
order is fixed. If you specify 4-in-1
you can specify horizontal or vertical
orientation. If you specify 2-in-1 or 4-
in-1, set your original documents on
the ADF, alternatively enable
Continuous Scan mode and use the
document glass (see
Scan" on page
Allows you to print multiple images of
an original document on a single
sheet.
Allows you to set ID card copying as
the default copy mode.
Copying > 48
"Continuous
49).