Crestron Roomview Tools Window - Epson EB-1470Ui User Manual

Crestron RoomView Support
Freeze Images are paused or released.
C
Contrast Adjusts the difference between light and shade in the
images.
Brightness Adjusts the image brightness.
Color Adjusts the color saturation for the images.
Sharpness Adjusts the image sharpness.
Zoom Enlarges or reduces the image without changing the
projection size. Click the arrow buttons to change the
position of an enlarged image.
Arrow buttons Performs the same operations as the arrow buttons on
D
the remote control.
OK Performs the same operation as [Enter] on the remote
control.
Menu Displays and closes the projector's menu.
Auto Optimizes Tracking, Sync., and Position in the
projector's Signal menu while projecting an analog
RGB signal from Computer port.
Search Changes to the next input source that is sending an
image.
Esc Performs the same operation as the [Esc] button on the
remote control.
Contact IT Help Displays the Help Desk window. Used to send
E
messages to, and receive messages from, the
administrator using Crestron RoomView Express.
Info Displays information on the projector that is currently
connected.
Tools Changes settings in the projector that is currently
connected.

Crestron RoomView Tools Window

Settings on the Tools window let you customize various projector setup
features.
Make settings for Crestron central controllers.
Projector Name Enter a name to differentiate the projector that is
B
currently connected from other projectors on the
network. (up to 16 alphanumeric characters)
Location Enter an installation location name for the projector
that is currently connected on the network. (up to 32
alphanumeric characters and symbols)
Assigned To Enter a user name for the projector. (up to 32
alphanumeric characters and symbols)
DHCP Select to use DHCP. You cannot enter an IP address if
DHCP is enabled.
IP Address Enter the IP address to assign to the currently
connected projector.
Subnet Mask Enter a subnet mask for the currently connected
projector.
Default Gateway Enter the gateway address for the currently connected
projector.
Send Click to confirm the changes made to the Projector.
204