Epson EB-1470Ui User Manual page 175

Wired Network Projection
f
Select the Wired LAN menu and press [Enter].
g
Select IP Settings and press [Enter].
h
Select your IP Settings as necessary.
• If your network assigns addresses automatically, set the DHCP
setting to On.
• If you must set addresses manually, set the DHCP setting to Off and
enter the projector's IP Address, Subnet Mask, and Gateway
Address as necessary.
To highlight the numbers you want from the displayed keyboard,
a
press the arrow buttons on the remote control. To select a
highlighted number, press [Enter].
i
To prevent the IP address from being displayed on the LAN standby
screen and Home screen, set the IP Address Display setting to Off.
j
When you finish selecting settings, select Complete and follow the on-
screen instructions to save your settings and exit the menus.
k
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the LAN standby screen.
175
EB ＊＊＊＊＊＊