Table of Contents
Advertisement
Projector Setup Settings - ECO Menu
Setting
Options
A/V Mute Timer
On
Off
Standby Mode
Standby Mode
Port
ECO Display
On
Off
Reset
—
• When the Sleep Mode Timer setting is enabled, and if there is no
a
signal input for a certain period of time, the light source dims before
the projector turns off.
g g Related Links
• "Projector Setup Settings - Extended Menu"
Description
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Available when you have set A/V Output
to While Projecting.
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the light
source brightness changes (when On).
Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
p.219
241
Advertisement
Table of Contents
