Table of Contents
Advertisement
Projector Connections
b
Connect the USB cable or USB flash drive to the projector's USB-A port
as shown.
Attention
• Use the USB cable supplied with or specified for use with the device.
• Do not connect a USB hub or a USB cable longer than 3 meters, or the
device may not operate correctly.
Select USB1 as the image source when you connect a USB device
a
to one of the USB-A ports.
c
Connect the other end to your device, if necessary.
Connecting a USB Flash Drive to the Control Pad
You can connect your USB flash drive to the USB-A port on the control pad
and use it to project images and other content.
You can also connect a USB flash drive directly to the projector's USB-
a
A port.
a
Connect the projector to the control pad.
b
Connect the USB flash drive into the USB-A port on the bottom of the
control pad.
Select USB1 as the image source to project images on the USB
a
flash drive.
Disconnecting a USB Device
When you have finished presenting with a connected USB device, disconnect
the device from the control pad or projector.
a
Turn off and unplug the device, if necessary.
b
Disconnect the USB device from the control pad or projector.
38
Advertisement
Table of Contents
