Screen Adjustments - Iiyama ProLite T1731SAW-B5 User Manual

SCREEN ADJUSTMENTS

Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
 The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
 ProLite T1531 and ProLite T1532 series are designed to provide the best performance at resolution
of 1024 × 768, but can not provide the best at resolutions of less than 1024 × 768 because the
picture is automatically stretched to fi t the full screen. It is recommended to operate at resolution of
1024 × 768 in normal use.
 ProLite T1731 and ProLite T1931 series are designed to provide the best performance at resolution
of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024 because the
picture is automatically stretched to fi t the full screen. It is recommended to operate at resolution of
1280 × 1024 in normal use.
 Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
 It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
 Perform adjustments after a warm-up period of at least thirty minutes.
 Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
 The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for H/V-POSITION,
H-SIZE and FINE. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a fl icker or blur, or the picture does not fi t in the display area after performing
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE
 Consult the appropriate documentation for doing this.
 Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
®
OS.
Color bar
Picture frame
OPERATING THE MONITOR 15