Table of Contents
Advertisement
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following
the button operation shown below. For more detailed adjustments, see page 15 for SCREEN
ADJUSTMENTS.
Press the
Button to start the On Screen Display feature. There are additional Menu
items which can be switched by using the
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Use the
Use the
/
Buttons to make the appropriate adjustment or setting.
Press the
Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for vertical position, select Menu item of
by using the
Buttons.
Use the
/
Buttons to change the vertical position settings. The vertical position of the overall
display should be changing accordingly while you are doing this.
Press the
Button lastly, it ends, any changes are saved in the memory.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD TIMEOUT has passed.
button can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H/V-POSITION, H-SIZE and FINE are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
/
Buttons.
C ON T RA S T
B R I GH T NE SS
1 28 0x1 024
F H: 63 KHz
F V: 5 9. 9H z
Buttons to highlight the desired adjustment icon.
A U TO A D JUS T
H - POS ITI ON
V-P OSI TIO N
H- SIZ E
FIN E
100
. Then, select V-POSITION
OPERATING THE MONITOR 9
Advertisement
Table of Contents
