ICP DAS USA I-7530-G CR User Manual page 33

BB
00
01
02
03
04
05
06
07
08
09
0A
0B
Response: A valid command will write the RS-232 configuration
parameters into the EEPROM and then reboot the I-7530 module.
Invalid command: ?<Error Code><CR>
Note: It is necessary to enable the "Error Response" function in the I-
7530 Utility, in order to receive Syntax and/or communication error
information at the host PC.
Example:
Command: P00B30000<CR>
Set the RS232 baud rate=115.2K, data bit=8, stop bit=1, none parity,
no checksum and No error responses into the I-7530 module and
then reboot the I-7530 module.
I-7530 RS-232/CAN Converter User's Manual (Version 2.5, Mar/2012) ------------- 33
Table 9: RS-232 baud rate list
110 bps baud rate of RS-232
150 bps baud rate of RS-232
300 bps baud rate of RS-232
600 bps baud rate of RS-232
1200 bps baud rate of RS-232
2400 bps baud rate of RS-232
4800 bps baud rate of RS-232
9600 bps baud rate of RS-232
19200 bps baud rate of RS-232
38400 bps baud rate of RS-232
57600 bps baud rate of RS-232
115200 bps baud rate of RS-232
Description