Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Gefen HDSDI-2-HDMIS
Summary of Contents for Gefen HDSDI-2-HDMIS
- Page 1 HD-SDI to HDMI Scaler U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. The HD-SDI to HDMI Scaler is a trademark of Gefen Inc.
-
Page 3: Table Of Contents
Introduction Operation Notes Panel Descriptions Menu Functions Supported Input/Output Resolutions RMT-8HDS-IR Installation Firmware Update Procedure Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
The HDSDI to HDMI Scaler is the newest revision of our HDSDI conversion line incor- porating SD/HDSDI Single or Dual link mode conversion scaled to HDMI. Resolutions of up to 1080p are supported over the DVI link for those that want true “High Defi nition”. Supports HDSDI with embedded audio and outputs a full HDMI video and audio signal. -
Page 5: Operation Notes
OPERATION NOTES On power up, the HD-SDI to HDMI Scaler will automatically detect the input format of the input. The unit is controlled using the included 8 button remote. Pressing the OUTPUT button cycles the HD-SDI to HDMI Scaler through the following output modes: 640x480 - 800x600 - 720p - 1080i Other functions and output modes can be accessed through the onscreen menu. -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Infrared Eye Power Indicator Light RS-232 Uplink Port 5V Power HDMI Output SPDIF HD-SDI Input / Connector Output Loop Out Genlock Input... -
Page 7: Menu Functions
Aspect: -Full Screen: Stretches input to fi ll the Monitor. -Letter / Pillar Box: Sets the aspect ratio to fi t a letter or pillar box format. -Panoramic: Panoramic Zoom feature -Extract: Feature to magnify the signal. -Extract Size -Horizontal / Vertical Position -Through: 1:1 Mapping -Horizontal / Vertical Size: Horizontally and vertically contracts or expands the cropping viewport. - Page 8 Input Menu Continued... -Audio: Selects which audio pair to use for audio output (1 - 8); Default is Channel 1. -Remote Channel: Changes the IR code of the HD-SDI to HDMI Scaler to one of 4 different settings between 0 and 3. When the remote channel is changed, dip switches in the 16 button remote must be changed to the corresponding code in order to continue operating the HD-SDI to HDMI Scaler.
-
Page 9: Supported Input/Output Resolutions
SUPPORTED INPUT/OUTPUT RESOLUTIONS Input Video Formats Supported: 480i 720p/50 480p 720p/59.94 576i 720p/60 576p 1035i/59.94 720p/23.98 1035i/60 720p/24 1080i/50 720p/25 1080i/50M 720p/29.97 1080i/59.94 720p/30 1080i/60 Output Video Formats Supported: 480i 720p/50 480p 720p/59.94 576i 720p/60 576p 1035i/59.94 720p/23.98 1035i/60 720p/24 1080i/50 720p/25 1080i/50M... -
Page 10: Rmt-8Hds-Ir Installation
RMT-8HDS-IR INSTALLATION 1. Remove battery cover from the back of the RMT-8HDS-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 11: Firmware Update Procedure
FIRMWARE UPDATE PROCEDURE Please check http://www.gefen.com/kvm/support/download.jsp for fi rmware updates and procedures. -
Page 12: Specifi Cations
SPECIFICATIONS Input Video Bandwidth...2x 1.485 Gbps (Dual Link HD-SDI) Output Video Bandwidth...6.6 Gbps Maximum Output Resolution...1920x1200@60Hz HDMI Connector...type A 19 pin female Audio Output...HDMI embedded audio & S/PDIF out Power Supply...5V DC Shipping Weight...5 lbs. Dimensions...8.25”W x 1.75”H x 7.5”H...
Need help?
Do you have a question about the HDSDI-2-HDMIS and is the answer not in the manual?
Questions and answers