Panasonic PT-RZ660 Operating Instructions Manual page 66

Chapter 3 Basic Operations — Switching on/off the projector
2) Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
3) Press qw to adjust.
4) Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1) Press qw to switch the setting.
2) Press the <ENTER> button to proceed to the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
66 - ENGLISH
INITIAL SETTING
SCREEN FORMAT 16:9
0
SCREEN POSITION
Set as necessary for the screen in use.
CHANGE
MENU SELECT
SET
ENTER
INITIAL SETTING
+09:00
TIME ZONE
20XX/01/01
LOCAL DATE
12 : 34 : 56
LOCAL TIME
Please set up a time zone according to the area of your
country or region.
MENU SELECT CHANGE
SET
ENTER
5/7
6/7