Panasonic PT-RZ660 Operating Instructions Manual page 164

Item
[PHOSPHOR WHEEL2]
r [WARNING] items
Item
[LOW-TEMPERATURE]
[INTAKE AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
[EXHAUST AIR TEMPERATURE]
[LIGHT1 TEMPERATURE]
[LIGHT2 TEMPERATURE]
[BATTERY]
[AC VOLTAGE]
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
164 - ENGLISH
Chapter 5 Operations — Web control function
There is a problem with the phosphor wheel 2 or phosphor wheel 2 drive circuit. Consult
your dealer.
The temperature around the optics module inside the projector is low. Image cannot be
projected until the optics module becomes warm.
The intake temperature is high. The projector may be used in an environment where the
temperature is high, such as near a heating appliance.
The temperature around the optics module inside the projector is high. The projector
may be used in an environment where the temperature is high, such as near a heating
appliance.
The exhaust air temperature is high. The air exhaust port may be blocked.
The temperature of the light source is high. The projector may be used in an
environment where the temperature is high, such as near a heating appliance.
Battery replacement is required. Consult your dealer.
The input supply voltage is low. Use electric wiring that can sufficiently withstand the
power consumption of the projector.
Description
Description