Panasonic PT-RZ660 Operating Instructions Manual page 163

Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the [SELF TEST] display field of the [Projector status]
screen, click it to display the content of the error/warning.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[FAILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
r [FAILED] items
Item
[MAIN CPU BUS]
[FAN]
[INTAKE AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
[EXHAUST AIR TEMPERATURE]
[LIGHT1 TEMPERATURE]
[LIGHT2 TEMPERATURE]
[LIGHT1 STATUS]
[LIGHT2 STATUS]
[INTAKE AIR TEMP.SENSOR]
[OPTICS MODULE TEMP.SENSOR]
[EXHAUST AIR TEMP.SENSOR]
[LIGHT1 TEMP.SENSOR]
[LIGHT2 TEMP.SENSOR]
[COLOR WHEEL]
[LENS MOUNTER]
[BRIGHTNESS SENSOR]
[ANGLE SENSOR]
[ATM SENSOR]
[PHOSPHOR WHEEL1]
Chapter 5 Operations — Web control function
There is a problem with the microcomputer circuitry. Consult your dealer.
There is a problem with the fan or the fan drive circuit. Consult your dealer.
The intake air temperature is high. The projector may be used in an environment where
the temperature is high, such as near a heating appliance.
The temperature around the optics module inside the projector is high. The projector
may be used in an environment where the temperature is high, such as near a heating
appliance.
The exhaust air temperature is high. The projector may be used in an environment
where the temperature is high, such as near a heating appliance. Or the air exhaust port
may be blocked.
The temperature of the light source is high. The projector may be used in an
environment where the temperature is high, such as near a heating appliance.
The light source has failed to turn on. Consult your dealer.
There is a problem with the sensor used to detect intake air temperature. Consult your
dealer.
There is a problem with the sensor used to detect temperature inside the projector.
Consult your dealer.
There is a problem with the sensor used to detect exhaust air temperature. Consult your
dealer.
There is a problem with the temperature detection sensor of light source. Consult your
dealer.
There is a problem with the color wheel or the color wheel drive circuit. Consult your
dealer.
There is a problem with the lens mounter. Consult your dealer.
There is a problem with the luminance sensor. If problems persist even after switching
on the power, consult your dealer.
There is a problem with the angle sensor. Consult your dealer.
There is a problem with the air pressure sensor. Consult your dealer.
There is a problem with the phosphor wheel 1 or phosphor wheel 1 drive circuit. Consult
your dealer.
1
Description
ENGLISH - 163