B C R Signal Is Input) - Panasonic PT-RZ660 Operating Instructions Manual

[ON]
[OFF]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [WARNING MESSAGE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If [OFF] is set, the warning message will not be displayed on the projected image even when warning condition such as [TEMPERATURE
WARNING] is detected while using the projector. Also, the following countdown message is not displayed: the message until the power
is turned off after the no signal lights-out function is executed; the message until the light source is turned off after the no signal lights-out
function is executed
[CLOSED CAPTION SETTING] (only when NTSC or 480/60i YC
Set closed captions.
Selecting the closed caption display
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [CLOSED CAPTION].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 5) when [ON] is selected.
5) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption mode
1) Press as to select [CLOSED CAPTION SETTING].
2) Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3) Press as to select [MODE].
f [MODE] cannot be selected when [CLOSED CAPTION] is set to [OFF].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[CC1]
[CC2]
[CC3]
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the input guide.
Hides the input guide.
Displays the warning message.
Hides the warning message.
Hides closed captions.
Displays closed captions.
Displays CC1 data.
Displays CC2 data.
Displays CC3 data.
C signal is input)
B R
ENGLISH - 113