Panasonic PT-RZ660 Operating Instructions Manual page 32

r Connecting terminals
1 <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are terminals to connect the remote control for serial
control in a multiple projector environment.
2 <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the
external control circuit.
3 <SERIAL/MULTI PROJECTOR SYNC IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
This terminal is also used to connect multiple projectors when
balancing the contrast as a combined screen or synchronizing
the effects using the shutter function including the fade in/fade
out with a system using multiple projectors.
4 <SERIAL/MULTI PROJECTOR SYNC OUT> terminal
This is a terminal to output RS-232C compliant signal input to
the <SERIAL/MULTI PROJECTOR SYNC IN> terminal.
This terminal is also used to connect multiple projectors when
balancing the contrast as a combined screen or synchronizing
the effects using the shutter function including the fade in/fade
out with a system using multiple projectors.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
32 - ENGLISH
Chapter 1 Preparation — About your projector
1 2 3
5 6
4
7 8 9 10
5 <SDI IN> terminal
This is a terminal to input the SDI signal.
(Only for PT-RZ770, PT-RZ660)
6 <RGB 1 IN> terminals (<R/P
<SYNC/HD>, <VD>)
These are terminals to input RGB signal, YC
Y/C signal, or video signal.
7 <RGB 2 IN> terminal
This is a terminal to input the RGB signal or YC
signal.
8 <DVI-D IN> terminal
This is a terminal to input the DVI-D signal.
9 <HDMI IN> terminal
This is a terminal to input the HDMI signal.
10 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also
used when connecting a video signal transmission device via
the LAN terminal.
/VIDEO>, <G/Y>, <B/P /C>,
R B
C /YP P signal,
B R B R
C /YP P
B R B R