1. Manuals
  2. Brands
  3. Gefen Manuals
  4. Matrix Switcher
  5. HDTV-444
  6. User manual

Gefen HDTV-444 User Manual

4x4 dvi matrix switcher
Hide thumbs

Advertisement

Table of Contents

Technical Support:
Telephone
(818)772-9100
(800) 545-6900
Fax
(818)772-9120
Internet
Technical Support Hours:
9:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth CA 91311
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The 4x4 DVI Matrix is a trademark of Gefen Inc.
ASKING FOR ASSISTANCE
support@gefen.com / www.gefen.com
Notice
© 2004 Gefen Inc., All Rights Reserved

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDTV-444 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gefen HDTV-444

Summary of Contents for Gefen HDTV-444

  • Page 1 20600 Nordhoff Street Chatsworth CA 91311 Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. The 4x4 DVI Matrix is a trademark of Gefen Inc.

  • Page 2: Table Of Contents

    Introduction Operation Notes Back Panel Layout Back Panel Descriptions Wiring Diagram Warranty TABLE OF CONTENTS...

  • Page 3: Introduction

    INTRODUCTION Thank you for purchasing the 4x4 DVI Matrix The 4x4 DVI Matrix switches four computers (PC or MAC) to any four DVI digital displays with USB keyboard and mouse. The 4x4 DVI Matrix switcher has four DVI inputs and four DVI outputs. Matrix input#1 and the graphics port of Computer #1 connects using a male to male DVI cable.

  • Page 4: Operation Notes

    OPERATION NOTES READ THESE NOTES BEFORE IN STALL ING OR OPERATING THE 4X4 DVI/HDTV MATRIX • The 4x4 HDTV Matrix is the same as the 4x4 DVI Matrix, but the USB may or may not be functional • You should connect all the cables and power supply prior to connecting power to the computers and 4x4 DVI Matrix •...

  • Page 5: Back Panel Layout

    BACK PANEL LAYOUT...

  • Page 6: Back Panel Descriptions

    BACK PANEL DESCRIPTIONS 24VDC - Connect to 12-24VDC power supply. Remote - 2 wire serial remote control RMT4 - RJ45 connector connects to the ex•tend•it RMT-4 remote control. Each RMT-4 controls one of the outputs by switching to one of the the inputs. USB In - USB input from each source (computer).

  • Page 7: Wiring Diagram

    WIRING DIAGRAM...
  • Page 8 USING THE 4X4 DVI MATRIX Connect all the computers to DVI In and USB In on the 4x4 DVI Matrix, using the supplied cables. DVI In 1 and USB In 1 must be connected to the same computer, all the other inputs must connect the same way. Connect the USB devices and DVI displays to the outputs on the 4x4 DVI Matrix using the supplied cables.

  • Page 9: Warranty

    However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.

Table of Contents