JETWAY LA0H Series User Manual page 34

display.
The optional settings: [VBIOS Default]; [HDMI]; [VGA]
When set as [HDMI] or [VGA], user can make settings in 'Secondary IGFX Boot
Display' items that appear:
Second IGFX Boot Display
Use this item to select Secondary Display Device.
The optional settings: [Disabled]; [HDMI]; [VGA].
Internal Graphics
Use this item to keep IGFX enabled based on the setup options.
The optional settings are: [Auto]; [Disabled]; [Enabled].
Aperture Size
Use this item to select the Aperture Size.
The optional settings are: [128MB]; [256MB]; [512MB]; [1024MB]; [2048MB].
*Note: Above 4GB MMIO BIOS assignment is automatically enabled when
selecting 2048MB aperture. Please disable CSM Support to use this feature.
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
The optional settings are: [32M]; [64M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
PEG Slot Configuration

Press [Enter] to make settings for the following sub-items:
PEG Port Configuration
PCIE2 Slot
Enable Root Port
Use this item to enable or disable the root port.
The optional settings: [Disabled]; [Enabled]; [Auto]
Max Link Speed
Use this item to configure PEG 0: 1: 0 Max Speed.
The optional settings: [Auto]; [Gen1]; [Gen2]; [Gen3].
Max Link Width
Use this item to force PEG link to retrain to X1/2/4/8.
The optional settings: [Auto]; [Force X1]; [Force X2]; [Force X4]; [Force X8].
Detect Nom-Compliance Device
Use this item to detect Non-Compliance PCI Express Device in PEG.
The optional settings are: [Disabled]; [Enabled].
PCH-IO Configuration

Press [Enter] to make settings for the following sub-items:
HD Audio

Use this item to control detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled].
[Disabled]: HDA will be unconditionally disabled;
[Enabled]: HDA will be unconditionally enabled;
[Auto]: HDA will be enabled if present, disabled otherwise.
Onboard Lan1 Controller

30