JETWAY LA0H Series User Manual page 27

Serial Port 1 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [Auto]; [IO=3F8h; IRQ=4]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11].
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
Use this item to select RS232/RS422/RS485 speed.
The optional
RS422/RS485=10Mbps].
Serial Port 2 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=2F8h; IRQ=3]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11].
Transmission Mode Select
The optional settings are: [RS422]; [RS232]; [RS485].
Mode Speed Select
Use this item to select RS232/RS422/RS485 speed.
The optional
RS422/RS485=10Mbps].
Serial Port 3 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=3E8h; IRQ=10]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11]; [IO=3E0h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E0h; IRQ=3, 4, 5,
settings: [RS232/RS422/RS485=250Kbps];
settings: [RS232/RS422/RS485=250Kbps];
23
[RS232=1Mbps,
[RS232=1Mbps,