JETWAY LA0H Series User Manual page 25

SATA Mode Selection
Use this item to determine how SATA controller(s) operate.
The default settings: [AHCI].
SATA Port 1/ SATA Port 2/ SATA 3/ SATA 4/M.2
Port
Use this item to enable or disable each SATA port.
The optional settings: [Disabled]; [Enabled].
Hot Plug
Use this item to designate this port as Hot Pluggable.
The optional settings: [Disabled]; [Enabled].
PCH-FW Configuration

Press [Enter] to view current Management Engine Technology Parameters and
make more settings for the following sub-item:
TPM Device Selection
Use this item to select TPM device: PTT or dTPM. When set as PTT, user can
enable PTT in SkuMgr. When set as dTPM 1.2, user can disable PTT in
SkuMgr.
The optional settings: [dTPM]; [PTT].
Warning!
► Firmware Update Configuration
Press [Enter] to go to 'ME FW Image Re-Flash' to enable or disable ME FW
Image Re-Flash function.
ME FW Image RE-Flash
Use this item to enable or disable ME FW Image Re-Flash function.
The optional settings: [Disabled]; [Enabled].
* In the case that user needs to update ME firmware, user should set 'ME FW
Image Re-Flash' as [Enabled], save the settings and exit. The system will
turn off and reboot after 4 seconds. If the user goes to BIOS screen again will
find this item is set again as [Disabled], but user can still re-flash to update
firmware next time.
Trusted Computing

Press [Enter] to make settings for the following sub-items:
TPM20 Device Found
Security Device Support
Use this item to Enables or Disables BIOS support for security device.
*Note: O.S. will not show security Device. TCG EFI protocol and INTIA interface
will not be available.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], users can make more settings for the following sub-items:
Pending operation
Use this item to schedule an operation for the Security Device.
*Note: Your computer will reboot during restart in order to change State of
Security Device.
The optional settings: [None]; [TPM Clear].
TPM 2.0 UEFI Spec Version
PTT/dTPM will be disabled and all data saved on it will be lost.
21