JETWAY LA0H Series User Manual page 28

7, 10, 11].
Serial Port 4 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=2E8h; IRQ=10]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11]; [IO=3E0h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E0h; IRQ=3, 4, 5,
7, 10, 11].
Serial Port 5 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=3E0h; IRQ=11]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11]; [IO=3E0h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E0h; IRQ=3, 4, 5,
7, 10, 11].
Serial Port 6 Configuration

Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
The optional settings: [Disabled]; [Enabled].
When set as [Enable], user can make more settings for the following sub-items:
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings: [IO=2E0h; IRQ=11]; [IO=3F8h; IRQ=3, 4, 5, 7, 10, 11];
[IO=2F8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=3E8h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E8h;
IRQ=3, 4, 5, 7, 10, 11]; [IO=3E0h; IRQ=3, 4, 5, 7, 10, 11]; [IO=2E0h; IRQ=3, 4, 5,
7, 10, 11].
Printer/GPIO Select
Use this item to set Parameters of Parallel Port (LPT/LPTE)
The optional setttings: [GPIO]; [Printer].
When set as [Printer], user can make more settings for the following sub-items:
Parallel Port Configuration

Press [Enter] to set Parameter of Parallel Port (LPT/LPTE), and make settings for
the following sub-items:
Parallel Port Configuration
24