Sharp Conference Series Operation Manual page 36

Image Projection (Continued)
GEOMETRIC ADJUSTMENT
1 1
Press KEYSTONE on the
projector or on the remote
control repeatedly until
"GEOMETRIC ADJUSTMENT" is
displayed.
2 2 Press P, R, O or Q to move the
position for the upper left of the
image.
3 3
Press ENTER to set the position.
4 4
Repeat the same procedure with
the positions for the upper right,
lower right and lower left of the
image.
•
At this time, pressing RETURN on the
projector or on the remote control returns
to the previous screen.
• When the position of the lower left is
set, the correction is made and the
display disappears.
32
ROn-screen display ROn-screen display
GEOMETRIC ADJUSTMENT GEOMETRIC ADJUSTMENT
H&V KEYSTONE H&V KEYSTONE
NEXT NEXT
Geometric Adjustment
Upper Left
ADJUST ADJUST
RESET RESET
Upper Right Lower Right
Lower Left